Actions

Difference between revisions of "Laser Cutter Operators Log"

From HacDC Wiki

m (Gatohaus moved page LaserCutterOperatorsLog to Laser Cutter Operators Log: camelecase page name complicates search success)
 
(One intermediate revision by one other user not shown)
Line 2: Line 2:


'''When you use the Laser Cutter, please add notes here. Newest at top.'''
'''When you use the Laser Cutter, please add notes here. Newest at top.'''
* 18 Oct 2013: [[User: rob]] experimented with engraving some black-and-white images on acrylic and cut some acrylic for a project. The Full Spectrum LLC print driver just gave me error messages and I couldn't figure out the problem, so I just converted my images to BMP and that worked fine. It may be of interest that I have found that cutting 0.177" thick acrylic reliably takes 10-11 passes at 100% power, 100% speed. 10 passes leaves some small chads at the edges that are brushed off pretty easily; 11 generally cuts it clean.


* [[User:Haxwithaxe]] made acrylic PentaGo board parts. [https://github.com/haxwithaxe/pentago-flat design]. i forgot to record the time used.
* [[User:Haxwithaxe]] made acrylic PentaGo board parts. [https://github.com/haxwithaxe/pentago-flat design]. i forgot to record the time used.
** i used some of the red plastic that was next to the table and it made sort of a cotton candy like material when lased so we might want to figure out what it is exactly.
** i used some of the red plastic that was next to the table and it made sort of a cotton candy like material when lased so we might want to figure out what it is exactly.

Latest revision as of 10:49, 16 February 2014


When you use the Laser Cutter, please add notes here. Newest at top.

  • 18 Oct 2013: User: rob experimented with engraving some black-and-white images on acrylic and cut some acrylic for a project. The Full Spectrum LLC print driver just gave me error messages and I couldn't figure out the problem, so I just converted my images to BMP and that worked fine. It may be of interest that I have found that cutting 0.177" thick acrylic reliably takes 10-11 passes at 100% power, 100% speed. 10 passes leaves some small chads at the edges that are brushed off pretty easily; 11 generally cuts it clean.
  • User:Haxwithaxe made acrylic PentaGo board parts. design. i forgot to record the time used.
    • i used some of the red plastic that was next to the table and it made sort of a cotton candy like material when lased so we might want to figure out what it is exactly.