Laser Cutter Settings

From HacDC Wiki
Revision as of 09:50, 16 February 2014 by Gatohaus (talk | contribs) (Gatohaus moved page LaserCutterSettings to Laser Cutter Settings: camelecase page name complicates search success)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Vector

Fiberboard

Etch

5% power 100% speed

Cut

95% power 5% speed 2 passes

Raster

Nail Polish Resist

Used to mask copper clad board for chemical etching.

25% power

50% speed

Blue Tape

Excellent solder stencil material.

100% speed 100% power