Prusa Mendel Documentation

From HacDC Wiki

Revision as of 12:31, 6 September 2012 by DigiFAB (talk | contribs)

This is the page on how to use the newly built Prusa Mendel (iteration 2). A PC has been dedicated to run it, below you will find the toolchain used to run it and other details that you may find useful.

Current Machine Status



CAD/Thingiverse -> Netfabb -> STL -> Slic3r -> Pronterface -> PRINT!

Any modelling software that can output the file format STL.
Some programs of interest might be the following: Google Sketchup, OpenSCAD, TinkerCAD, Solid Works, AutoCAD, Rhino.
And in case you don't want to model anything and simply want to print stuff, go to Thingiverse.
software for checking the "3D printability" of the model you created. Go to Netfabb and download the Studio Basic option. You can also simply use their cloud offering and have a repaired model emailed back to you.
if your model has issues, run the repair function with default settings and see if that remedies the issues. The repair function can be used by clicking the "first aid" symbol found at the far right on the tool bar.
current format for 3D printing (AMF is coming around the corner).
at this point, your file should be patched up and ready to print.
software for creating 3d printing toolpaths
precompiled binaries can be had from or be built built from github.
use the profiles already generated for best results.
GUI for controlling the Prusa.
where you will connect to the printer, home, warm up and send print jobs from.
can be built from github or download precompiled binaries for Windows/Mac here.
preview G-Code generated by Slic3r.
File is good to go, toolpaths are generated, time to let the robot do what it does best, PRINT!


  • PLA
  • ABS
Polylactic Acid
made from corn starch, smells like waffles/syrup while printing
less prone to warping
more brittle compared to ABS
needs a fan, it remains much more molten after being extruded
lower operating temperatures (160C-200C)
Preferred plastic of choice
same plastic in which LEGOs are made of
higher operating temps (220C-240C)
smells like death, can release carcinogens at higher temps
requires a heated bed (110C) or warping occurs
requires kapton/PET tape on heated print surface for best adhesion. Possibly a light sanding of the surface and slurry of dissolved ABS in acetone for further warp prevention.